RIKEN COLLETS
|
| Static Chuck
Strong dust standard adapter device type SAD
• Powerful. (Conventional, designed to withstand the thrust of about 1.5 times).
• Through the flange can be mounted easily on any machine.
• Ideal for bar machining collet Static.
• Seals against dust.
• Stationary Collet Chuck Collet standard.
|
|
WSC wide Chuck
• only use WSC Colletts, can grasp the work of 3 mm width.
(Thereby reducing the number of replacement of the collet.)
• You can still use the standard type, high accuracy can be gripping.
• Available through bore for bar machining.
• Seals against dust.
• Collet Chuck, Collet Chuck still only the standard type and WSC.
|
|
AOC Air Chuck
• Front zipper. Rotating cylinder is not required, ideal for use in confined spaces.
• Compressed air supply pressure.
• Available through bore for bar machining.
• Stationary Collet Chuck Collet standard.
|
|
Stationary Collet chucks (SAD, WSC, AOC , RO-sharing FE, AD, VOC, HNC)
• Round Square Hexagonal, available as standard stock sizes.
(Some sizes are special order)
• Rubber dust standard.
• The collet chuck is also available for master-25.40.50.65.
• Square 4 mm hexagon will be produced from the opposite side. 40 hex for more than 35 mm is a special order.
|
|
WSC wide type collet
• Wide-only type chuck WSC.
• Can chuck a workpiece width 3mm.
• Runout accuracy is class C.
|
|
PULL Collet
PULL Type Collet chuck
• Precision.
• Automated, unmanned (auto-loading) to deal with, accurately and reliably can be confirmed seat.
• Powerful grip. (Taper 20 °)
• standard collet chuck (type PULL) ASP, and shared with the MD.
|
|
Collets to suit PULL, ASP, MD Type
• Precision, suddenly swing around A.
(Riken also manufacture Class AA)
• Round Square Hexagonal, available as standard stock sizes.
(Some sizes are special order)
• Powerful grip. (Taper 20 °)
• Rubber dust can be installed optionally.
|
|
Fixed Chuck
ASP Chuck
• Precision.
• Collet chuck is fixed.
• Exercise power in a thin wide workpieces.
(Since it is nearly flush with the end face of collet body end surface, eliminating the stall of a collet chuck)
• Powerful grip. (Taper 20 °)
• Can be mounted from the front chuck.
• Type I is a hollow structure, ideal for bar machining.
• standard collet chuck (type PULL) ASP, and shared with the MD.
|
|
|
|
