NIKON METROLOGY
Vision Measuring Software

Automeasure
E-max Software

Automeasure Vision Measuring Software

Powerful and easy-to-use measuring and inspection software platform for Nikon NEXIV vision systems.

Programmable and user-friendly software platform puts the power of Nikon NEXIV vision systems at your fingertips.

Automeasure software is a complete package that includes interactive measurement and teaching wizards, CAD interface functionality, shape analysis capability and data management tools. The software also integrates with shape profile, 3D surface analysis, and sophisticated report generation programs.

Request more information

Applications

MEMS, microelectronics and optoelectronics
Metal and plastic manufacturing

Automeasure

Click picture to enlarge

Automotive manufacturing
Medical Devices
Liquid crystal displays
Surface Analysis, cracks & failure analysis
Metallurgy

Functionalities

CAD interface off-line teaching support program: NEXIV virtual AutoMeasure
This program enables CAD data to be read into the Virtual Video Window on a separate computer, allowing the operator to use NEXIV's teaching program with the same operational procedures as on the online computer. This eliminates the necessity of using the actual workpiece during teaching sessions and lets the NEXIV system concentrate on automatic measurement for increased productivity.

Supports IGES, DXF, DMIS, NC files, Gerber, and Excellon.
The Virtual Video Window enables the operator to confirm the current field of view based on CAD data.
Same operational procedures as the NEXIV AutoMeasure.
Manual or one-click automated programming.
Possible to combine programs with Macro steps, such as Line Width Measure and Multi Pattern Search.

Two-dimensional profile shape analysis program: NEXIV profiler
This program makes it possible to measure and judge 2-dimensional profile shapes in a workpiece that cannot be measured in the normal geometric mode. Now more accurate quantitative measurements can be taken than with the chart comparison method using profile projectors and/or conventional measuring microscopes.

Shape Profile Function: When the operator enters the start point, end point, and the measurement pitch, NEXIV automatically performs the measurement and saves the results.
Shape Evaluation Function: Deviations between the measurement results and the nominal shape data are graphically displayed on the monitor or printed out for easy evaluation.
Calculation of shape deviations: axis direction; normal direction
Table listing of shape data
Graph drawing of shape data
Creation of nominal shape data: data can be created not only by keyed-in entry but also from CAD data. Data creation by exchanging the measured shape data is also possible.
Shape "Best Fit" Function: This function is used to minimize the deviation between the measurement results and the nominal shape data. Deviation evaluation is easy even when the two use different coordinates.
Creation of Nominal Shape Data from CAD Data: Nominal shape data can be created from CAD data in the DXF/IGES file format.

NEXIV VMR control program
This program enables multiple teaching files to be run sequentially according to set replay instructions.

Simplifies the process of giving instructions to measure many different workpieces continuously, e.g., measurements of various dedicated jigs
Allows the inspector's operating environment to be separated from that of the system administrator
Enables the administration of inspection date, inspector, date of manufacture, lot number and other inspection data
Automatic printing linked to inspection sheets

Interactive teaching wizards
A set of default teaching wizards provides step-by-step guides to facilitate teaching, regardless of the knowledge or experience of the operator. Besides these, operators can customize teaching wizards by registering frequently used teaching procedures.

Interactive measurement wizards
The measurement wizards guide operators, step by step, through what is required to achieve their tasks. In addition to the default wizards, operators can create customized wizards by registering frequently used procedures to streamline future operation.

On-line CAD interface program
By importing CAD data (IGES, DXF, Gerber, and Excellon) of a workpiece, the operator can display graphics in the CAD graphic window on NEXIV VMR AutoMeasure. This facilitates efficiency in teaching and shortens working time.
The operator can move the stage to the desired position by double-clicking the appropriate position within the input workpiece.
This function makes it possible to create a teaching file automatically from CAD feature data on NEXIV VMR AutoMeasure.

NEXIV VMR visual basic control
With the developed Communication Package Program, users can program their own application software to remotely control the various functions of the NEXIV AutoMeasure on a Visual Basic 6.0/Net environment. By sending variables to the AutoMeasure teaching file, workpieces of different sizes can be measured on a single program. The results data then can be sent back to the VB program.

AutoMeasure add-ons

Bird's-Eye View: NEXIV's 3D surface analysis program. Developed by OriginLab® Corporation and running on Origin™, this program allows data obtained using the Scan Measure feature provided with TTL Laser AF to be plotted in a 3-dimensional format. After that, 3-dimensional shape analysis and 2-dimensional cross-section shape analysis can be performed.
D-SURF: This software not only draws 3D graphics of a minuscule workpiece surface measured by the NEXIV system, but it also provides various analyses such as the calculation of various evaluation values.
Gear Evaluation Software: This software provides evaluations on various parameters of the measured workpiece, including pitch deviations, tooth space runout, base tangent length, and dimension overpin , based on industrial standards.
Real-Time SPC via DDE (Dynamic Data Exchange): Using a DDE Link function, measured data can be immediately transferred to spreadsheets such as Microsoft Excel®, SPC-PC IV, SPC-PC IV Excel, and others, making real-time SPC analysis possible. Note: SPC-PC IV and SPC-PC IV Excel are products of Quality America, Inc.
Focus images synthesis program: The MultiLayer View program can be used to synthesize focus portions of multiple images of the same field of view taken at different layers, creating one perfect image that is in focus throughout. Before synthesis is carried out, the images can be displayed as thumbnails on a PC monitor so that users can select the desired focus portions.
The NEXIV's CCD camera captures multiple images on the Z-axis.
When configured with the NEXIV system, users can easily attach the whole image of measured portions to an inspection result sheet.
VMR Report Generator: This software is fully compatible with the NEXIV VMR AutoMeasure software and enables the quick generation of inspection results sheets in various report forms including user-designed forms. Users can even customize the program for their own easier use by making macro scripts.

top of page

E-Max Measuring Software

Intuitive data processing software package for industrial microscope and profile projector systems.

A cost effective software solution for state-of-the-art image processing.

Serving the needs of industrial metrology professionals, Nikon's E-Max software provides full edge detection measurements with sub-pixel processing, enabling more precise and repeatable measurements. The software is used with Nikon's digital still camera, the DS-2Mv, and features advanced edge detection functions, ranging from two-dimensional data processing and image measurements to data storage capabilities.

Request more information

E-MAX

Functionalities

E-Max controls
E-Max lets you control white LED illumination, magnification switchover, microscopic methods, aperture setting, laser auto-focus, and more.

Real-time SPC via DDE
Using a DDE Link function, measured data can be immediately transferred to spreadsheets such as Microsoft Excel®, SPC-PC IV, SPC-PC IV Excel, and others, making SPC analysis possible.

Supports touch screen operation
Larger icon mode is selectable for a touch screen operation environment. The mouseless operation enables operators to concentrate on measurements.

Interactive operation wizards
Depending on measurement requirements, operators can select Quick Measure, Teaching Measure or Run Teaching File modes, with wizards.

Chart measurement
A chart with nominal shapes and tolerance lines can be generated from CAD data. It can be superimposed on the actual video image for easy and quick "Go/No Go" judgements.

Powerful imaging processing technologies
E-Max provides FOV (field-of-view) measurements without a dedicated image processing board. This allows the software to be installed in high-performance laptop PCs, greatly saving work space. SVGA (800x600) images from the digital camera can be captured via USB 2.0 can can be processed and measured using Nikon's latest Automated Video Edge Detection and measuring algorithms.

Navigation function
The graphic window displays the next measurement position in brown, preventing errors and allowing speedy measurement (during replay). The current position is displayed in pink.